manualshive.com logo in svg

Raven AutoBoom 9600, Installation Manual, Page: 65 / 79

Share
Download
Raven AutoBoom 9600 Installation Manual Download Page 65

5

Manual No. 016-0230-096

59

ULTRAGLIDE

3. Connect the Left Press connector to Port G1 on the AutoBoom valve.
4. Connect the Right Press connector to Port G4 on the AutoBoom valve.
5. Locate the Left Solenoid and Right Solenoid connectors on the harness cable.
6. Connect the Left Solenoid connector to Port 4A on the AutoBoom valve.
7. Connect the Right Solenoid connector to Port 4B on the AutoBoom valve.
8. Locate the Left Prop and Right Prop connectors on the harness cable.
9. Connect the Left Prop connector to Port 5A on the AutoBoom valve.
10. Connect the Right Prop connector to Port 13A on the AutoBoom valve.
11. Disconnect the machine’s harness cable connection from the left up coil on the machine’s hydraulic valve.
12. Install a boom sense adapter cable (P/N 115-0171-546) on the coil.
13. Connect the machine’s harness cable to the installed boom sense adapter cable.
14. Disconnect the machine’s harness cable connection from the right up coil on the machine’s hydraulic valve.
15. Install a boom sense adapter cable (P/N 115-0171-546) on the coil.
16. Connect the machine’s harness cable to the installed boom sense adapter cable.

FIGURE 13. Machine’s Up Cylinder Wiring

17. Connect the Left and Right Up connectors on the AutoBoom harness (P/N 115-0230-045 or 115-0230-085) to 

the installed boom sense adapter cables.

FIGURE 14. Machine’s Open Center Coil

18. Disconnect the machine’s harness cable connection from the open center coil on the machine’s hydraulic valve.

Summary of Contents for AutoBoom 9600
















































































Reviews:

No comments