Raven AutoBoom 9600 Installation Manual Download Page 44 | Manualshive

Page: 44 / 79

Raven AutoBoom 9600 Installation Manual Download Page 44

C

HAPTER

4

38

Fast 9600 - 80’-120’ Booms AutoBoom Installation Manual

3. Connect the Left Press connector to Port G1 on the AutoBoom valve.
4. Connect the Right Press connector to Port G4 on the AutoBoom valve.
5. Locate the Left Solenoid and Right Solenoid connectors on the harness cable.
6. Connect the Left Solenoid connector to Port 4A on the AutoBoom valve.
7. Connect the Right Solenoid connector to Port 13A on the AutoBoom valve.
8. Locate the Left Prop and Right Prop connectors on the harness cable.
9. Connect the Left Prop connector to Port 5A on the AutoBoom valve.
10. Connect the Right Prop connector to Port 13A on the AutoBoom valve.

FIGURE 16. Machine’s Directional Valve

11. Locate the machine’s directional valve.
12. Disconnect the machine’s directional valve connector from the directional valve.
13. Install a boom sense adapter cable (P/N 115-0171-546) on the machine’s directional valve connector.
14. Install the single weatherpack boom sense adapter cable (P/N 115-0171-790) on the installed boom sense

adapter cable.

15. Connect the right and left Down connectors on the AutoBoom harness cable (P/N 115-0230-045 or 115-0230-

085) to the connectors on the installed weatherpack boom sense adapter cable (P/N 115-0171-790).

FIGURE 17. Machine’s Up Cylinder Wiring

16. Install boom sense adapter cables (P/N 115-0171-546) between the machine’s cylinder up coils and the

connectors.

«
...
42
43
44
45
46
...
»

Summary of Contents for AutoBoom 9600
















































































Reviews:

No comments