Raven AutoBoom 9600, Installation Manual, Page: 57 / 79

5
Manual No. 016-0230-096 51
ULTRAGLIDE
FIGURE 4. Machine’s Pressure Hose Removed and Fitting Installed
1. Disconnect the machine’s pressure hose from the machine’s hydraulic valve.
2. Remove the machine’s existing elbow fitting from the pressure port of the machine’s hydraulic valve.
FIGURE 5. Machine’s Pressure Hose Installed on the AutoBoom Valve
3. Connect the machine’s pressure hose to the installed fittings in Port P of the AutoBoom valve.
4. Install a 3/4” SAE O-ring (M) to 3/4” JIC (M) straight adapter fitting (P/N 333-0012-093) in the pressure port of
the machine’s hydraulic valve.
CAUTION
When installing AutoBoom hydraulics or
performing diagnostics, maintenance, or routine
service, ensure precautions are taken to prevent
any foreign material from being introduced into
the machine’s hydraulic system.
Objects or materials that are able to bypass the
machine’s hydraulic filtration system will reduce
performance and possibly damage the
AutoBoom hydraulic valve.
Machine’s
Pressure
Hose
Hydraulic Hose
Installed from
Machine’s Pressure
Port to Port EF of
the AutoBoom
Valve