Raven AutoBoom 9600, Installation Manual, Page: 20 / 79

C
HAPTER
3
14 Fast 9600 - 80’-120’ Booms AutoBoom Installation Manual
MOUNT THE AUTOBOOM VALVE
FIGURE 3. AutoBoom Valve Mounting Location
1. Verify that the existing holes in the machine’s center rack (to the left of the machine’s hydraulic valve) align with
the mounting holes in the AutoBoom valve. If they do not, drill two 5/16” holes in the mounting location the
same distance apart as the holes in the AutoBoom valve.
2. Secure the AutoBoom valve (P/N 063-0131-127) to the machine’s center rack using two 5/16”-18 x 1-1/4” hex
bolts (P/N 311-0052-106) and two 5/16” zinc lock washers (P/N 313-1000-019).
INSTALL THE PRESSURE AND TANK HOSES
WARNING
Hydraulics are under pressure. Care should
always be taken with a system that has been
pressurized. When disconnecting or purging
hydraulic hoses, be aware that the hydraulic fluid
within the machine’s system may be extremely
hot and under high pressure.
CAUTION
When installing AutoBoom hydraulics or
performing diagnostics, maintenance, or routine
service, ensure precautions are taken to prevent
any foreign material from being introduced into
the machine’s hydraulic system.
Objects or materials that are able to bypass the
machine’s hydraulic filtration system will reduce
performance and possibly damage the
AutoBoom hydraulic valve.