Raven AutoBoom 9600, Installation Manual, Page: 39 / 79

4
Manual No. 016-0230-096 33
POWERGLIDE PLUS
FIGURE 11. Machine’s Pressure Hose Installed on the AutoBoom Valve
3. Connect the machine’s pressure hose to the installed fittings in Port P of the AutoBoom valve.
4. Install a 3/4” SAE O-ring (M) to 3/4” JIC (M) straight adapter fitting (P/N 333-0012-093) in the pressure port of
the machine’s hydraulic valve.
5. Install the straight end of the supplied hydraulic hose (P/N 214-1000-609) on the installed fitting in the
machine’s pressure port.
6. Connect the 90° end of the installed hydraulic hose to the installed fitting in Port EF of the AutoBoom valve.
FIGURE 12. Tank (Return) Hose Installed
7. Disconnect the machine’s return hose from the return port of the machine’s hydraulic valve.
8. Install a 3/4” JIC M/M/F swivel run tee adapter fitting (P/N 333-0012-039) in the machine’s return port.
9. Connect the machine’s tank (return) hose to the opposite end of the installed tee fitting.
10. Install the straight end of the supplied hydraulic hose (P/N 214-1000-609) on the 90° end of the installed tee
fitting.
11. Connect the 90° end of the installed hydraulic hose to the fittings installed in the Left T Port of the AutoBoom
valve.
Machine’s
Pressure
Hose
Hydraulic Hose
Installed from
Machine’s Pressure
Port to Port EF of
the AutoBoom
Valve