Raven AutoBoom 9600, Installation Manual, Page: 58 / 79

C
HAPTER
5
52 Fast 9600 - 80’-120’ Booms AutoBoom Installation Manual
5. Install the straight end of the supplied hydraulic hose (P/N 214-1000-609) on the installed fitting in the
machine’s pressure port.
6. Connect the 90° end of the installed hydraulic hose to the installed fitting in Port EF of the AutoBoom valve.
FIGURE 6. Tank (Return) Hose Installed
7. Disconnect the machine’s return hose from the return port of the machine’s hydraulic valve.
8. Install a 3/4” JIC M/M/F swivel run tee adapter fitting (P/N 333-0012-039) in the machine’s return port.
9. Connect the machine’s tank (return) hose to the opposite end of the installed tee fitting.
10. Install the straight end of the supplied hydraulic hose (P/N 214-1000-609) on the 90° end of the installed tee
fitting.
11. Connect the 90° end of the installed hydraulic hose to the fittings installed in the Left T Port of the AutoBoom
valve.
INSTALL THE LEFT AND RIGHT CYLINDER HOSES
FIGURE 7. Cylinder Hoses Installed
1. Disconnect the machine’s cylinder up hoses from the left and right cylinder up ports of the machine’s hydraulic
valve.
2. Install 9/16” JIC M/M/F swivel run tee adapter fittings (P/N 333-0012-043) in the open ports on the machine’s
hydraulic valve.