INSTALLATION MANUAL
–
RAVAS-
SafeLoad
5
1.
Introduction
This manual describes the assembly of the RAVAS-SafeLoad. The installer must be informed of the
contents of this manual. This manual should be kept in a dry and safe place.
In case of damage or loss the user may request a new copy of the manual from RAVAS.
This manual is based on firmware version 0.31 and higher.
2.
Warnings & safety measures
When installing the RAVAS-SafeLoad, please observe carefully the instructions
and guidelines contained in this manual. Always perform each step in
sequence. If any of the instructions are not clear, please contact RAVAS.
The installation of the RAVAS-SafeLoad should only be performed by an
acknowledged electro and hydraulic technical installer. Possible failures to
the equipment must be communicated to your installer. The equipment should
be checked annually by your installer.
Always follow the safety measures concerning the forklift - or stacker truck
accurately.
The RAVAS-SafeLoad is an advisory system for forklift truck drivers. RAVAS-
SafeLoad does not intervene with the forklift truck’s system hardware,
therefore it remains the sole responsibility of the driver to react to the
warnings as issued by the RAVAS-SafeLoad
Should you have any further questions after reading this manual please contact us at:
RAVAS Europe B.V.
Veilingweg
17
Phone:
+31
(0)418-515220
5301 KM Zaltbommel
Internet:
www.ravas.com
Netherlands
Email:
Changes reserved.
READ
CAREFULLY
ATTENTION
