INSTALLATION MANUAL
–
RAVAS-
SafeLoad
34
8.
Error messages
8.1 Error
messages
Error
message
Logging
number
Meaning Action
Err01 1
Input
signal
unstable
Err01 (oil pressure)
Service call
Err04 4
Manual zeroing outside range
Err04 (oilpressure)
Press CE-key
Try removing the
weight from the forks
before using the zero
key. If there is no
weight on the scale
contact your service
dealer
Err06
6
AD signal too high
Err06 (of oilpressure sensor)
Service call
Err11 11
Input signal unstable
Err11 (moment sensor)
Service call
Err13
13
Zero tracking out of range
Check P049 of
moment settings
Service call
Err14 14
Manual zeroing outside range
Err14 (moment sensor)
Press CE-key
Try removing the
weight from the forks
before using the zero
key. If there is no
weight on the scale
contact your service
dealer
Err15
15
Compensated zero out of range
Increase P019 an/or
P020 or perform a
new zero calibration
Err16
16
AD signal too high
Err16 (of moment sensor)
Service call
OiLPr
90
Connection error of the oilpressure
sensor
Service call
tLtSE
91
Connection error of the moment sensor Service
call
----- *
2
92 Underload
Lift the forks from the
ground
OLOAD*
1
93
Overload on maximum weight
Remove the weight
from the forks
dLOAD 94
Dynamic
overload
Reduce weight on the
forks or omit impacts
OLOAD*
1
95
Overload on maximum moment
Remove the weight
from the forks or
replace the weight
more to the vertical
part of the forks
OLOAD*
1
96
Overload on maximum weight and
moment
Remove the weight
from the forks
