INSTALLATION MANUAL
–
RAVAS-
SafeLoad
6
3.
Overview of the parts
The RAVAS-SafeLoad system exists of four main parts:
1. Indicator
2. Oil
pressure
sensor
3. Moment
force
sensors
4. Height
switch
The pressure sensor has to be connected to a T-link on the hydraulic system of the forklift truck.
The indicator, the control panel, runs on 12 Volt DC (variances of 9VDCup to 18VDC are regulated
and filtered by an integrated regulator board) .
The power supply of the indicator can be connected to the battery of the forklift. The most common
voltages for fork-lift trucks are 12, 24, 48 and 80 V. In cases where the battery voltages are higher
then 12 VDC, the system demands a DC-DC voltage converter with an output of 12 Vdc. Only by
RAVAS approved convertors may be used. If other convertors are used the warranty of the indicator is
no longer valid.
See MyRAVAS.com for the parts list.
parts list see
www.ravas.com
