![background image](http://html1.mh-extra.com/html/ravas/safeload/safeload_installation-manual_3820637024.webp)
INSTALLATION MANUAL
–
RAVAS-
SafeLoad
24
6.4. Calibration procedure
6.4.1. Entering the calibration mode
Power up the truck to start the RAVAS-SafeLoad indicator.
o
The buzzer (if activated) will beep shortly and the display will show in the
following order; all segments on, the software version and the present weight.
o
NOTE: if the truck is within an alarm situation the buzzer will sound.
Press and hold the F-key for 10 seconds.
o
The display will show [PASS.?]
Press
the
-key shortly.
o
The display will show [000
0
] with the most right digit blinking.
Enter the passcode by using the
↑
-key, the
↓
-key and the
-key.
o
If the wrong passcode was entered the display will shortly show [CdErr] and
next return to the previous step; [PASS.?]
o
If the right passcode was entered the display will show [CAL]
Press
the
-key shortly.
o
The display will show [Unit-] with the present unit sign activated;
kg
.
Change the unit by using the
↑
-key or the
↓
-key.
Press
the
-key shortly to accept the unit.