Ravas SafeLoad, Installation Manual

Page: 34 / 40

INSTALLATION MANUAL – RAVAS- SafeLoad 32
Example changing a parameter setting in P101

After entering the parameter number press the

-key.
o
The display will show [Start].

If the start value needs to be changed press the ↑ -key.
o
The display will show [-010] with the most right digit blinking.

Change the value using the ↑ -key, the ↓ -key and the

-key.
Or

If the start value doesn’t need to be changed press the

-key.
o
The display will show [rELAy].

If the relay setting needs to be changed press the ↑ -key.
o
The display will show [OFF] blinking.

Change the value using the ↑ -key or the ↓ -key and press the

-key.
Or

If the buzzer setting doesn’t need to be changed press the

-key.
o
The display will show [bUZZ].

If the buzzer setting needs to be changed press the
↑
-key.
o
The display will show [OFF] blinking.

Change the value using the
↑
-key or the
↓
-key and press the

-key.
Or

If the buzzer setting doesn’t need to be changed press the

-key.
o
The display will show [LigHt].

If the backlight setting needs to be changed press the ↑ -key.
o
The display will show [grEEn] blinking.

Change the value using the ↑ -key or the ↓ -key and press the

-key.
Or

If the backlight setting doesn’t need to be changed press the

-key.
o
The display will show [OLOAd].

If the overload setting needs to be changed press the ↑ -key.
o
The display will show [OFF] blinking.

Change the value using the ↑ -key or the ↓ -key and press the

-key.
Or

If the overload setting doesn’t need to be changed press the

-key.
o
The display will show [LOg].

If the logging setting needs to be changed press the ↑ -key.
o
The display will show [OFF] blinking.

Change the value using the ↑ -key or the ↓ -key and press the

-key.
Or

If the logging setting doesn’t need to be changed press the

-key.
o
The display will show [P_001].

Press the ↑ -key shortly if you need to change another LED bar setting.
o
The display will show [P_00 1 ] with the most right digit blinking.

Press the CE-key if you want to leave the settings menu and return to the weigh
mode.
o
The display will show [Wght].

Press the CE-key again to leave the settings menu and return to the weigh mode.
The settings may be altered according own experiences and wishes. The default settings are
given in the table.