INSTALLATION MANUAL
–
RAVAS-
SafeLoad
36
8.2
Checking the logged errors
For checking the last 50 errors of the RAVAS-SafeLoad enter the parameter mode as
described on page 25 (7.1
Parameter setting mode)
.
After entering the parameter number press the
-key.
o
The display will gather all the errors from the memory and eventually show
[00-xx]. This might take a few seconds during which time the display will show
[Wait].
For scrolling through the errors use the
↑
-key or
↓
-key.
o
The first 2 digits of the display [
00
-xx] show the error no, the second 2 digits
[00-
xx
] show the error. See the error list on page 31 for its meaning.
For checking the date and time of the error press the
-key.
o
The display will show [YE-16] (
Year 2016
).
press
the
-key several times for the month, day, hours and minutes.
o
The display will show [
∏
┐
-10 ] >> [dA-03] >> [ho-08] >> [
∏
┐
-46 ] and
eventually return to the error code [00-
xx
] .
Press
the
↑
-key for checking the next error.
Or
Press the CE-key for leaving the parameter. Press the CE-key twice again to leave
the parameter mode and return to the weigh mode.
8.3
Debug mode (for troubleshooting)
For entering the debug mode follow the procedure for entering the calibration mode as
described on page 21 (6.4.1
Entering the calibration mode)
.
With [CAL] in the display press the
↑
-key or
↓
-key.
o
The display will show [dEbuG].
press
the
-key.
o
The display will show the mV input signal of the oil pressure sensor: 0.1354.
o
Note that in this mode the ‘kg’ sign is on.
Press
the
↓
-key for the next debug value.
o
The display will show the AD-counts of the oil pressure sensor: 881.
o
Note that in this mode the ‘kg’ sign is on.
Press
the
↓
-key for the next debug value.
o
The display will show the AD-counts of the moment sensor: 125.
o
Note that in this mode the ‘%’ sign is on.
Press
the
↓
-key for the next debug value.
o
The display will show the mV input signal of the moment sensor: 0.0054.
o
Note that in this mode the ‘%’ sign is on.
