Hardware Installation
PixelStor 5000 User Manual
Rev. 1, May 2013
4-57
Figure 4-42 System Health Alert Options
To change health alert options
1. Select Enable or Disable on the System Health Alert Options page
2. Click on the Save Changes button
4.3.4
Configuring the iSNS Client
The
PixelStor 5000
provides an iSNS client for registration with an iSNS server. To fully utilize
the iSNS service you must configure an iSNS server and configure your iSCSI initiator to use
the iSNS server.
Once you have defined the IP address and alias for the iSNS Server, you must start the iSNS
client on the target. Starting the iSNS client and saving changes will enable automatic iSNS
client start up on any subsequent reboot.
To configure and use the iSNS target client, click on the iSNS Options icon on the Options page
to bring up the iSNS Configuration page shown in Figure 4-43.
