Rasilient PixelStor 5000 User Manual Download Page 105

Page: 105 / 161

Hardware Installation

PixelStor 5000 User Manual
Rev. 1, May 2013

4-68

Now Performance Data under the system tab may be used.

4.3.11

Disk Power Management Status

Disk Groups

Disk Group Name or Spare/Orphan disks.

Management Mode

This field indicates the current power management status for the disks belonging to this

group. If the status is "off", then the system will not manage the power status of the drives in this

group. The drives in this group remain in the active state all the time. If the status is "on", then

the system will manage the power status of the drives in this group. The drives will go into

standby mode after the specified inactivity period.

Inactivity Timer

This field specifies how long the drive should wait before it transits from active mode to

standby mode if there is no activity. Valid values: 0, 10, 20, 30, 60, 90, 120, 150, 180, 210, 240,

270, 300 and 330 minutes. A value of 0 disables spin down.

Scheduling Information

This field specifies whether power management scheduling is enabled for this group. If

power management scheduling is enabled, it displays the time interval that the drives remain in

the active mode. Outside of this time interval, the drives will go to standby mode after the

specified period of inactivity.

Summary of Contents for PixelStor 5000


































































































































































Search results

Summary of Contents for PixelStor 5000

Reviews:

Related manuals for PixelStor 5000

Brands by name

Popular brands

Rasilient PixelStor 5000, User Manual

Search results

Summary of Contents for PixelStor 5000

Reviews:

Related manuals for PixelStor 5000

Brands by name

Popular brands