Raritan DOMINION DSX-0N-E User Manual Download Page 95

Page: 95 / 233

HAPTER

OGGING

Note: The NFS server must have the exported directory with write permission for the port
logging to work.

To configure NFS Logging:

Click the

Setup

tab, and then click

NFS

. The NFS Settings screen appears.

Figure 72 NFS Settings Screen

Click the

Enable NFS

checkbox to enable NFS logging.

Type the IP address of the NFS server in the

Primary IP

field, and then enter the path to the

log file in the

Primary Directory

field.

If you have a backup NFS server, enter the same information for this server in the

Secondary

field and

Secondary Directory

fields. If the primary server fails, port logging is

redirected to the secondary server.

Click

Summary of Contents for DOMINION DSX-0N-E









































































































































































































































Search results

Summary of Contents for DOMINION DSX-0N-E

Reviews:

Related manuals for DOMINION DSX-0N-E

Brands by name

Popular brands

Raritan DOMINION DSX-0N-E, User Manual

Search results

Summary of Contents for DOMINION DSX-0N-E

Reviews:

Related manuals for DOMINION DSX-0N-E

Brands by name

Popular brands