Raritan DOMINION DSX-0N-E, User Manual

Page: 179 / 233

C
HAPTER
14: P
OWER
C
ONTROL
161
Scenario #3 Port Power Association – Associate 6 Outlets to one port spread across
two PDUs.
Pre-condition Administrator user is logged in via CLI.
Two Power Strip devices (DPX) are physically connected and configured
to the DSX, respectively named PowerStr1 and PowerStr2.
User is in power menu.
Action 1. Type command - associate [port port] [powerstrip powerstrip] [outlet
outlet] to associate Outlet1 of PowerStr1 to Port1
2. Press Enter.
3. Repeat steps 1 and 2 for Outlet 2 and 3.
4. Type command - associate [port port] [powerstrip powerstrip] [outlet
outlet] to associate Outlet1 of PowerStr2 to Port1
5. Press Enter.
6. Repeat steps 4 and 5 for Outlet 2 and 3.
CLI Input
⋅
associate port 1 powerstrip PowerStr1 outlet 1,2,3
⋅
associate port 1 powerstrip PowerStr2 outlet 1,2,3
Scenario #4 Port Power Association – Associate one Outlet to two Ports.
Pre-condition Administrator user is logged in via CLI.
Power Strip device (DPX) is physically connected and configured to the
DSX named PowerStr1.
User is in power menu.
Action 1. Enter command
2. Press enter
CLI Input
⋅
associate port 1 powerstrip PowerStr1 outlet 1
⋅
associate port 2 powerstrip PowerStr1 outlet 1
Scenario #5 Port Power Association – Associate all available Outlets to Ports.
Pre-condition Administrator user is logged in via CLI.
Power Strip device (DPX) is physically connected and configured to the
DSX named PowerStr1.
User is in power menu
Action 1. Enter command.
2. Press enter.
3. Repeat steps 1 and 2 for all available Outlets with up to 6 outlets
associated to a single port.
CLI Input associate port 1 powerstrip PowerStr1 outlet 1
Scenario #6 Port Power Association – Associate outlets to one Port from different
Power Strips.
Pre-condition Administrator user is logged in via CLI.
Two Power Strip devices (DPX) are physically connected and configured
to the DSX respectively named PowerStr1 and PowerStr2.
User is in power menu.
Action 1. Enter command to associate Port1 to Outlet1 from PowerStr1.
2. Press Enter.
3. Enter command to associate Port1 to Outlet1 from PowerStr2.
4. Press Enter.
CLI Input
⋅
associate port 1 powerstrip PowerStr1 outlet 1
⋅
associate port 1 powerstrip PowerStr2 outlet 1
Scenario #7 Port Power Association – Associate outlets from 6 different Power Strips
to one Port.