Raritan DOMINION DSX-0N-E, User Manual

Page: 88 / 233

70 D
OMINION
SX U
SER
G
UIDE
Firewall
The DSX provides a firewall function to provide protection for the IP network and to control
access between the internal router and the LAN 1, LAN 2 and the dial modem interfaces.
Enable the Firewall
To enable the firewall:
1.
Click the
Security
tab, and then click
Firewall
. The Firewall Screen appears. The Firewall
screen displays the existing IPTables rules.
Figure 63 Firewall Screen
2.
Click the check box labeled
Enable Firewall
.
3.
Click
OK
.
Note: When you enable IP forwarding for Dual LAN units, use IPTables rules to create
policies for traffic being forwarded between LAN interfaces
Add an IPTables Rule
To add an IPTables rule:
1.
Click the
Security
tab, and then click
Firewall
. The Firewall Screen appears. The firewall
screen displays the default IPTables rules.
2.
Go to the
Add/Delete IP Tables Rule
field and enter a rule.
3.
Click
Apply
, and then click
Save
. The rule is displayed on the screen.
4.
Delete some or all of the default rules if you choose.
5.
Add
new rules if you choose.
Note: Rules are added using the IP Tables command to the kernel. These rules take effect
immediately but persist permanently only after clicking the Save button.
Note: If there is a mistake in the rules and as a result, the unit becomes inaccessible, the Save
action allows you to recover from the mistake. Reboot the system. If you do not Save the rules,
you lose them in the reboot.