Raritan DOMINION DSX-0N-E, User Manual

Page: 129 / 233

C
HAPTER
12: C
OMMAND
L
INE
I
NTERFACE
111
Vieweventlog Command
The
vieweventlog
command displays the local log file.
The syntax of the vieweventlog command is:
vieweventfile
Vieweventlog Command Example
admin > Config > Log > vieweventlog
Configuring Modem
The
modem
menu provides access to commands used to configure modem access.
Callback
(dialback) occurs when the originator of a call is immediately called back in a second call as a
response to the first dialin. Configure modem dialin first and then enable dialback. Dialin and
Dialback should be enabled on the device used for modem communication (local, RADIUS,
LDAP, or ).
Table 14 Configuration: Modem Commands
C
OMMAND
D
ESCRIPTION
dialback
Enable/Disable the modem dial-back. Modem must be enabled for this to work.
dialin
Enable/Disable Modem and PPP settings.
[<enable|disable>][server IP] [client IP]
Modem Menu Command Examples
admin > Config > modem > dialin enable true serverip 10.0.13.211
clientip 10.0.13.212
admin > Config > modem > dialback enable true
admin > Config> Modem > show modem
Modem Settings:
Dialin Enabled: 1
Server IP : 10.0.13.211
Client IP : 10.0.13.212
Dialback : Enabled
Dialback with local user.
Before a modem connection can be established, the local user that is going to be used for dialin
authentication should be configured. A new user can be added or an existing one could be
reconfigured with a correct dialback. The correct configured user (Dialback number is 129)
should have the following settings:
User Settings:
Login : Modem
Name : Dialback
Info: SX
Dialback: 129