32
5.
Push the lower pot cover motor to the left and then lift it out while unthreading the
cable from the inside of the machine to remove the motor.
6.
Loosen the M3x5 hexagonal Nylok set screw securing the rotary head in place and
then remove the head from the motor.
7.
Remove the two M2.5x4 round Phillips head machine-tapping screws securing the
motor bracket in place and then remove the bracket from the motor.
To install the lower pot cover motor, reverse the steps above. Ensure you also follow
the cable routing instructions in “Lower Pot Cover Motor Cable” on page 63
Summary of Contents for FREDDA 1.0
Page 1: ...AI Rapid Cold Brew Maker Service Guide...
Page 2: ......
