8
The upper pot
light does not light
up.
1.
The top inner cover is
not installed.
2.
The upper pot is not
fully placed into the
compartment.
3.
The four screws for the
middle console cover
are not secured
correctly.
4.
The hinge board is
faulty.
5.
The middle console
sensor board on the
faulty.
6.
The 12-pin daughter
board cable is faulty.
1.
Install the top inner cover onto
the top cover. See “Installing
the Top Inner Cover” on
page 11 for more instructions.
2.
Place the upper pot correctly
into its compartment.
3.
Ensure that the four screws for
the middle console cover are
only tightened so that the
heads of each screw are level
with its adjacent surface and
are not screwed too tightly. See
step 1 in the “Opening the
Middle Console Cover” on
page 28 for more instructions.
4.
Replace the hinge board. See
“Replacing the Hinge Board” on
page 42 for instructions.
5.
Replace the middle console
sensor board. See “Replacing
the Middle Console Sensor
Board” on page 30 for
instructions.
6.
Replace the 12-pin daughter
board cable. See “Replacing the
12-Pin Daughter Board Cable”
on page 55 for instructions.
The lower pot
light does not light
up.
1.
The lower pot sensor
board is faulty.
2.
The 12-pin daughter
board cable is faulty.
1.
Replace the lower pot sensor
board. See “Replacing the
Lower Pot Sensor Board” on
page 53 for instructions.
2.
Replace the 12-pin daughter
board cable. See “Replacing the
12-Pin Daughter Board Cable”
on page 55 for instructions.
Issue
Possible Cause
Suggested Solution
Summary of Contents for FREDDA 1.0
Page 1: ...AI Rapid Cold Brew Maker Service Guide...
Page 2: ......
