48
4.
Remove the single black M2x5 Phillips head self-tapping screw securing the plastic
rotary head's magnet in place, and then remove the M2 stainless steel washer and
magnet from the rotary head.
5.
Pull the plastic rotary head out from its metal ring to remove it.
√
√
NOTE:
When re-installing the plastic rotary head, ensure that you push it
down fully so that it is fully secure in the metal ring.
To install the plastic rotary head, reverse the steps above.
Summary of Contents for FREDDA 1.0
Page 1: ...AI Rapid Cold Brew Maker Service Guide...
Page 2: ......