57
5.
Follow steps 1 to 3 in the power board section to separate the power board from its
compartment. See “Replacing the Power Board” on page 20 for instructions.
6.
Open the middle console cover. See “Opening the Middle Console Cover” on
page 28 for instructions.
7.
Disconnect the 12-pin daughter board cable from the (A) middle console sensor
board and (B) top lift sensor board.
8.
Remove the two black M2.5x6 round Phillips head machine-tapping Nylok screws
securing the bottom lift sensor board and the single M3x6 round Phillips head
machine-tapping Nylok screw securing the cable hook in place, and then remove
the sensor board and the hook from their compartment.
A
B
Summary of Contents for FREDDA 1.0
Page 1: ...AI Rapid Cold Brew Maker Service Guide...
Page 2: ......
