1
Before Getting Started
Read the following sections in their entirety before you get started on any maintenance
procedures to ensure that the entire process proceeds smoothly and without any
issues.
Tools/Equipment Needed
Ensure that you have the following tools at your disposal.
•
One Phillips head screw driver in the following sizes each:
•
#1 5mm x 8” / Length: 290mm / Handle Length: 85mm
•
#2 6mm x 8” / Length: 290mm / Handle Length: 85mm
•
One soldering gun
•
One utility knife
•
One pair of needle-nose pliers
•
Several spare plastic cable ties
•
One plastic cushion or mat
•
One hot glue gun and hot glue stick.
•
One tube of polyurethane multi-material composite adhesive (as shown in the
image below)
Summary of Contents for FREDDA 1.0
Page 1: ...AI Rapid Cold Brew Maker Service Guide...
Page 2: ......