35
Securing the Lower Pot Cover Motor
1.
Open the middle console cover. See “Opening the Middle Console Cover” on
page 28 for instructions.
2.
Check if the rotary head at the tip of the motor is fitted securely into teeth of the
conveyor beam.
3.
If not, remove the three M2.5x4 round Phillips head machine-tapping screws
securing the lower pot cover motor in place and then push the motor toward the
inside of the compartment so that the rotary head fits more securely and the screws
are aligned as shown in the image below.
Summary of Contents for FREDDA 1.0
Page 1: ...AI Rapid Cold Brew Maker Service Guide...
Page 2: ......