20
Replacing the Power Board
1.
Remove the rear cover from the machine. See “Removing the Rear Cover” on
page 11 for instructions.
2.
Disconnect the 2-pin power cable from the mainboard.
3.
Remove the three black M2.5x5 round Phillips head self-tapping screws securing
the power board in place and then carefully separate the board from its
compartment from the machine.
!
CAUTION:
DO NOT pull or attempt to completely remove the power board at
this point as this will damage its AC cable connection.
√
√
NOTE:
If the space near the board is too tight, disconnect the 12-pin
daughter board cable from the mainboard to create space to separate
the power board.
Summary of Contents for FREDDA 1.0
Page 1: ...AI Rapid Cold Brew Maker Service Guide...
Page 2: ......
