RAPIBREW FREDDA 1.0, Service Manual, Page: 46 / 67

42
Replacing the Hinge Board
1. Remove the top cover from the machine. See “Removing the Top Cover” on page 38
for instructions.
2. Remove the two M2.5x6 round Phillips head machine-tapping screws securing the
hinge board in place, and then remove the board from the system.
To install the hinge board, reverse the steps above.
Replacing the Stirrer Motor
1. Remove the top cover from the machine. See “Removing the Top Cover” on page 38
for instructions.
2. Remove the top inner cover