51
5.
Remove the hinge from the top cover while unthreading the 6-pin stirrer motor
cable and button board cable from the opening in the hinge.
To re-install the hinge, reverse the steps above. Ensure you also follow the cable routing
instructions in “Stirrer Motor and Button Board Cable” on page 59.
Replacing the 6-Pin Stirrer Motor Cable
1.
Remove the hinge. See “Removing the Hinge” on page 50 for instructions.
2.
Follow steps 1 - 3 in the Stirrer Motor section to open the operation panel. See
“Replacing the Stirrer Motor” on page 42 for instructions.
3.
Disconnect the 6-pin stirrer motor cable from the motor.
Summary of Contents for FREDDA 1.0
Page 1: ...AI Rapid Cold Brew Maker Service Guide...
Page 2: ......
