7
The pump is not
working.
1.
The pump is faulty.
2.
The mainboard is faulty.
1.
Replace the pump. See
“Replacing the Pump” on
page 25 for instructions.
2.
Replace the mainboard. See
“Replacing the Mainboard” on
page 18 for instructions.
The start button
does not light up.
1.
The upper and lower pot
are not placed correctly
into their
compartments.
2.
The 12-pin button board
cable is faulty.
3.
The button board is
faulty.
1.
Place the upper and lower pots
correctly into their
compartments.
2.
Replace the 12-pin button
board cable. See “Replacing the
12-Pin Button Board Cable” on
page 52 for instructions.
3.
Replace the button board. See
“Replacing the Button Board”
on page 49 for instructions.
The start button
lights up but is
unresponsive.
1.
The 12-pin button board
cable is faulty.
1.
Replace the 12-pin button
board cable. See “Replacing the
12-Pin Button Board Cable” on
page 52 for instructions.
Issue
Possible Cause
Suggested Solution
Summary of Contents for FREDDA 1.0
Page 1: ...AI Rapid Cold Brew Maker Service Guide...
Page 2: ......