9
The Wi-Fi light
does not light up.
1.
The Wi-Fi antenna is not
connected properly.
2.
The Wi-Fi module is
faulty.
3.
The 12-pin button board
cable is faulty.
4.
The button board is
faulty.
1.
Connect the antenna. See
“Connecting the Antenna” on
page 14 for instructions.
2.
Replace the mainboard. See
“Replacing the Mainboard” on
page 18 for instructions.
3.
Replace the 12-pin button
board cable. See “Replacing the
12-Pin Button Board Cable” on
page 52 for instructions.
4.
Replace the button board. See
“Replacing the Button Board”
on page 49 for instructions.
The red light
keeps flashing,
1.
The machine was forced
to power off in the
middle of the previous
session, so the pressure
in the lower pot is not at
the proper level during
the current powering on
process and as a result
the machine is in the
process of readjusting
the pressure.
2.
The pressure sensor is
faulty.
1.
Wait for some time, once the
middle console/lower pot
cover elevates, the machine
will working properly.
2.
Replace the mainboard. See
“Replacing the Mainboard” on
page 18 for instructions.
Issue
Possible Cause
Suggested Solution
Summary of Contents for FREDDA 1.0
Page 1: ...AI Rapid Cold Brew Maker Service Guide...
Page 2: ......