Operation - Page 27
COPYRIGHT © 2019 SANDVIK MINING AND CONSTRUCTION OY
Operation
RSS05R, RSS08R, RSS11R, RSS15R, RSS23R, RSS34R,
RSS45R, RSS58R, RSS80R
PRINCIPLES OF OPERATION
The operation of the product is based on a static force produced by the hydraulic
cylinder of the product. To increase the product's working life, pay particular
attention to correct working methods.
Cutting is performed with cutting blades at the rear of the jaws. The cutting blades
can be reversed.
JAWS, TEETH AND CUTTING BLADES
Jaws
The jaws are operated by the hydraulic cylinder. One jaw is fixed and the other,
equipped with breaking teeth, is moving. Crushing is performed using the crushing
teeth of the jaws.
Cutting blades
The cutting blades are fastened with screws. You can turn them to use unused
cutting edges or replace them with new cutting blades. See “Turning and changing
cutting blades” on page 53.