Maintenance - Page 63
COPYRIGHT © 2019 SANDVIK MINING AND CONSTRUCTION OY
Replacing lateral guide bushing
RSS05R, RSS08R, RSS11R, RSS15R, RSS23R, RSS34R,
RSS45R, RSS58R, RSS80R
6. REPLACING LATERAL GUIDE BUSHING
TORQUES FOR SCREWS
REPLACING LATERAL GUIDE BUSHING
Prior to maintenance or inspection, operate all the control levers to their fully
extended stroke. This will release pressure within the hydraulic piping and
prevent unexpected movement of the jaw and loss of oil through the hydraulic
lines.
Warning! Support the jaw to prevent it from closing unexpectedly during
maintenance.
The lateral guide regulator is subject to wear during operation. The buffer has a
bushing that you must replace whenever it is worn.
1. Position the product on level ground.
2. Support the jaw.
3. Make sure the carrier's transmission is in neutral and the parking brake is
engaged.
Screw
Tightening torque, grade
8.8
Tightening torque, grade
10.9
Tightening torque, grade
12.9
M8
25 Nm (18 lbf ft)
35 Nm (26 lbf ft)
42 Nm (31 lbf ft)
M10
50 Nm (37 lbf ft)
70 Nm (52 lbf ft)
85 Nm (63 lbf ft)
M12
85 Nm (63 lbf ft)
120 Nm (89 lbf ft)
145 Nm (107 lbf ft)
M14
135 Nm (100 lbf ft)
190 Nm (140 lbf ft)
230 Nm (170 lbf ft)
M16
210 Nm (155 lbf ft)
295 Nm (218 lbf ft)
355 Nm (262 lbf ft)
M18
290 Nm (214 lbf ft)
410 Nm (302 lbf ft)
490 Nm (361 lbf ft)
M20
410 Nm (302 lbf ft)
575 Nm (424 lbf ft)
690 Nm (509 lbf ft)
M24
710 Nm (524 lbf ft)
995 Nm (734 lbf ft)
1240 Nm (915 lbf ft)
M27
1050 Nm (774 lbf ft) 1450 Nm (1069 lbf ft) 1750 Nm (1291 lbf ft)
M30
1420 Nm (1047 lbf ft) 2000 Nm (1475 lbf ft) 2350 Nm (1733 lbf ft)
