30
GETTING TO KNOW YOUR VEHICLE
NOTE:
After pushing the door handle button, you
must wait two seconds before you can lock or
unlock the doors, using either Passive Entry
door handle. This is done to allow you to
check if the vehicle is locked by pulling the
door handle without the vehicle unlocking.
If Passive Entry is disabled using the
Uconnect Settings, the key protection
described in "Frequency Operated Button
Integrated Key (FOBIK-Safe)" remains active/
functional.
The Passive Entry system will not operate if
the key fob battery is depleted
The LED light on the key fob will not blink if
the key fob battery is low or fully depleted,
but a low key fob battery condition will still
support the Passive Entry system function
-
ality. When the key fob battery is low, the
instrument cluster will display a message
indicating that the key fob battery is low
A
UTOMATIC
U
NLOCK
D
OORS
O
N
E
XIT
—
I
F
E
QUIPPED
The doors will unlock automatically on vehicles
with power door locks after the following
sequence of actions:
1. The Automatic Unlock Doors On Exit
feature is enabled within Uconnect
2. All doors are closed.
3. The transmission gear selector was not in
PARK, then is placed in PARK.
4. Any door is opened.
A
UTOMATIC
D
OOR
L
OCKS
— I
F
E
QUIPPED
The auto door lock feature default condition is
enabled. When enabled, the door locks will lock
automatically when the vehicle's speed exceeds
15 mph (24 km/h). The auto door lock feature
is enabled/disabled within the Uconnect
C
HILD
-P
ROTECTION
D
OOR
L
OCK
To provide a safer environment for small
children riding in the rear seats, the rear doors
are equipped with a Child-Protection Door Lock
system.
To use the system, open each rear door, use a
flat blade screwdriver, and rotate the dial to the
lock or unlock position. When the system on a
door is engaged, that door can only be opened
by using the outside door handle even if the
inside door lock is in the unlocked position.
Child Lock Control
21_DJD2_OM_EN_USC_t.book Page 30
