RAM 2500 2021, Owner'S Manual

Page: 116 / 504

114 GETTING TO KNOW YOUR INSTRUMENT PANEL
Adaptive Cruise Control Ready
When ACC is activated but the vehicle speed
setting has not been selected, the display will
read “Adaptive Cruise Control Ready.”
Push the SET + or the SET- button (located on
the steering wheel) and the following will display
in the instrument cluster display:
ACC SET
When ACC is set, the set speed will display in
the instrument cluster
Ú
page 123.
The ACC screen may display once again if any
ACC activity occurs, which may include any of
the following:

Distance Setting Change

System Cancel

Driver Override

System Off

ACC Proximity Warning

ACC Unavailable Warning
LaneSense — If Equipped
The instrument cluster display displays the
current LaneSense system settings. The
information displayed depends on LaneSense
system status and the conditions that need to
be met.
Fuel Economy
Push and release the up or down arrow
button until the Fuel Economy menu item is
highlighted in the instrument cluster display.
Push and Hold the right arrow button to reset
Average Fuel Economy.

Current Fuel Economy Gauge

Average Fuel Economy Value

Range To Empty
Trip A/Trip B
Push and release the up or down arrow
button until the Trip menu item is highlighted in
the instrument cluster display. Push and
release the right arrow button to enter the
submenus of Trip A and Trip B. The Trip A or Trip
B information will display the following:

Distance

Average Fuel Economy

Elapsed Time
Push and hold right arrow button to reset all
information.
Trailer Tow
Push and release the up or down arrow
button until the Trailer Tow menu item is
highlighted in the instrument cluster display.
Push and release the right or left arrow
button to cycle through the following trailer tow
information:

Trip (trailer specific) Distance: Push and hold
the OK button to reset the distance.

Integrated Trailer Brake Module (ITBM):

Braking Output

Trailer Type

ITBM Gain

Trailer Light Check: Push and hold the OK
button to begin the Trailer Light Test
sequence
Ú
page 245.

Trailer Tire Pressure Monitoring: The Instru -
ment Cluster Display will display the Trailer
Tire Pressure for a connected trailer with
sensors that match the active trailer profile.
When a low tire is present, the low tire value
will be displayed in red, and the affected low
21_DJD2_OM_EN_USC_t.book Page 114