98
GETTING TO KNOW YOUR VEHICLE
T
RI
-F
OLD
T
ONNEAU
C
OVER
I
NSTALLATION
To install the Tonneau Cover follow the following
steps:
1. Position the folded Tonneau Cover on the
truck bed and push the cover forward
against the front of the truck bed. The
Tonneau Cover centers itself when placed
on the vehicle.
NOTE:
Make sure to always push the Tonneau Cover
all the way forward on the truck bed. Failure to
do so might prevent proper clamp engagement,
or interfere with the electronic tailgate release
function (if equipped).
Location Of Front Latches
2. Pull down on the first set of clamp handles to
release the clamps from the Stowed Position.
Stowed Position
3. Push clamp wires up and under the flange
of the box (or flange of the Ram Box rail, if
equipped) to the Semi-Clamped Position.
Semi Clamped Position
4. Push clamp handles upward to the clamped
position to properly engage the clamps.
Clamped Position
NOTE:
Once clamped, be sure the clamps are not
improperly attached to the truck bed flange.
Improper Clamp Position
21_DJD2_OM_EN_USC_t.book Page 98
