RAM 2500 2021 Owner'S Manual Download Page 275

Page: 275 / 504

MULTIMEDIA

273

Trailer Brake/Trailer

When the Trailer Brake/Trailer button is pressed on the touchscreen, the system will display settings related to trailer towing.

Audio

When the Audio button is pressed on the touchscreen, the system displays options related to the vehicle’s sound system. These settings can change

the audio location within the vehicle, adjust the bass or treble levels, and auto-play settings from an audio device or smartphone.

Setting Name

Description

Trailer Select

Select from “Trailer 1”, “Trailer 2”, “Trailer 3”, or “Trailer 4”. These trailer

designations can be used to save different trailer settings.

Trailer Brake Type

This setting will set the system to a specific trailer type. The available

options are “Light Electric”, “Heavy Electric”, “Light

Electric-Over-Hydraulic”, and “Heavy Electric-Over-Hydraulic”.

Trailer Name

This setting will personalize the trailer name depending on the type of

trailer you are hauling. Select the trailer name from the following list:

trailer, boat, car, cargo, dump, equipment, flatbed, gooseneck, horse,

livestock, motorcycle, snowmobile, travel, utility, and 5th wheel.

Setting Name

Description

Balance/Fade

This setting will adjust audio levels from specific speakers in the front/

back and left/right of the vehicle. The Speaker icon can be moved to set

audio location.

Equalizer

This setting will adjust the “Bass”, “Mid”, and “Treble” ranges of the

audio.

21_DJD2_OM_EN_USC_t.book Page 273

Summary of Contents for 2500 2021

























































































































































































































































































































































































































































































































Search results

Summary of Contents for 2500 2021

Reviews:

Related manuals for 2500 2021

Brands by name

Popular brands

RAM 2500 2021, Owner'S Manual

Search results

Summary of Contents for 2500 2021

Reviews:

Related manuals for 2500 2021

Brands by name

Popular brands