90
GETTING TO KNOW YOUR VEHICLE
detent nearest the desired location. Make sure
the cleat is seated in the detent and tighten the
nut.
Adjustable Cleat Assembly
Cleat Removal (With Tonneau Cover)
To remove the cleats from the utility rail, remove
the end cap screw located in the center of the
end cap, using a #T30 Torx head driver.
Remove the end cap and slide the cleat off the
end of the rail.
End Cap Screw Location With Tonneau Cover
Cleat Removal (Without Tonneau Cover)
Remove the end cap by pushing upward on the
release button located beneath the end cap
while pulling the cap away from the rail. The
cleat can now be removed by sliding it off the
end of the rail.
End Cap Release Button Without Tonneau Cover
Pull End Cap Away From Rail
RAMBOX — IF EQUIPPED
The RamBox system is an integrated pickup box
storage and cargo management system
consisting of up to three features:
Integrated box side storage bins
Cargo divider (if equipped)
Bed rail tie-down system (if equipped)
L
OCKING
A
ND
U
NLOCKING
R
AM
B
OX
Push and release the lock or unlock button on
the key fob to lock and unlock all doors, the
page 16. The
RamBox storage bins can be locked using the
vehicle key. To lock and unlock the storage bin,
1 — Utility Rail Detent
2 — Cleat Retainer Nut
3 — Utility Rail Cleat
21_DJD2_OM_EN_USC_t.book Page 90
