Rain Bird WS-PRO, Installation, Maintenance And Troubleshooting Manual

Page: 45 / 78

Page
35
FIGURE 19 - TELEPHONE MODEM INSTALLATION IN ET ENCLOSURE
9.0 SEALING & DESICCATING
THE ENCLOSURE:
The Enclosure is supplied with a
desiccant pack. The desiccant
maintains a low humidity in the
enclosure to minimize the chance of
condensation on the instrumentation
Desiccant should be changed when the
internal Enclosure humidity sensor
measures 30% or higher. Install the
desiccant as shown in FIGURE 21
below.
Keep unused desiccant tightly sealed
inan airtight container.
Take the desiccant pack out of its sealed
plastic bag. Place it under the dessicant
strap just before leaving the station.
Be sure to close the enclosure hasp
securely. A padlock may be used on the
latch for extra security.
FIGURE 20 - DESSICANT PACK
INSTALLATION