Rain Bird WS-PRO, Installation, Maintenance And Troubleshooting Manual

Page: 12 / 78

Page
2
2.0 TOOLS & SUPPLIES:
(Installer Supplied)
The installer needs access to the following tools and supplies for installation of the
Weather Station.
TOOLS REQ’D.
Shovel
Rake
Wire Strippers
Screw driver, regular blade
Flat Metal File
Screw driver, thin regular blade
Wheelbarrow
Screw driver, Phillips head
Hand Saw
Open End Wrench 7/16”
(2) - Open End Wrench 9/16”
Open End Wrench ½”
Open End Wrench 3/8”
Claw Hammer
Magnetic Compass
Tape Measure 12’ - 20’
Matr’l. for Concrete Base Form:
(4) 12” Wood Stakes
(1) 2”x 4”x 10’ piece of wood
(8) 8p double-head nails
(8)16p double-head nails
20 ft. of form wire
½ yard of concrete
6 Ft. Step Ladder
Concrete trowel & edger
Saw Horse
Wire
Fish Tape or small dia. rope
SUPPLIES REQ’D.
(2) Standard Size (12” x 18”)
Rectangular Valve Boxes
(3) MGP-1 Maxi Grounding Plate
Assembly
(5) MSP-1 Maxi Surge Arrestor (Pipe
Type) (for “PRO-SH” model ONLY).
(6)
5/8” Dia. X 8’-0” copper clad
grounding rods
#10 Gauge or larger bare copper
grounding wire - length as required.
Brass Grounding Clamps - as required
(20)
3-M model DBY or DBR Direct
Burial splice kits or 3-M Scotch-lok
3500 series Connector Packs.
Belden #9883 or PE-39 direct burial,
communication cable - length as
required.
(2) Lengths of type UF power wire
(white and black) - size and length as
required.
(1) 4” x 4” electrical junction box with
cover plus connectors as required for
transformer mounting.
(2) Open Spade, crimp-on type
connectors - for connecting power
wiring to transformer.
3.0