Rain Bird Freedom System for Maxicom2 Page 189 User Manual Download

Page: 189 / 208

Previewing and Printing Reports

After you have created a report using the Report wizard, Maxicom

will display

the report preview.

Previewing a Report

From this dialog box, you have the following options for previewing and printing
your reports:

•

Print

Click on this button to print out the report you are previewing; the Print
dialog box will allow you to specify which pages you would like to print.

•

Next Page

Click on this button to preview the next page of a multi-page report.

•

Prev Page

Click on this button to preview the previous page of a multi-page report.

•

Two Page

Click on this button to display two pages at a time of a multi-page report in
the preview window.

•

Zoom In

Click on this button to increase the screen size of the report you are
previewing.

Viewing the Event Log and Generating Reports

9.11

Summary of Contents for Freedom System for Maxicom2

















































































































































































































Search results

Summary of Contents for Freedom System for Maxicom2

Reviews:

Related manuals for Freedom System for Maxicom2

Brands by name

Popular brands

Rain Bird Freedom System for Maxicom2, User Manual

Search results

Summary of Contents for Freedom System for Maxicom2

Reviews:

Related manuals for Freedom System for Maxicom2

Brands by name

Popular brands