Rain Bird Freedom System for Maxicom2, User Manual

Page: 144 / 208

Viewing Projected Site Data
Projected site data is in the lower left portion of the Site sheet. Projected data is
editable only in that you may select a different evapotranspiration (ET) value than
that chosen by Maxicom
2 . The ET value chosen by Maxicom 2 is calculated from
the assigned weather source since the last automatic send. Projected site data
includes:
• Next Automatic Send — the time and date for the next scheduled automatic
send.
• Next Automatic Receive — the time and date for the next scheduled
automatic receive.
• Next Send Total Volume — the expected total water volume for the next
automatic send based on 100% water budget and affected by the ET value
that appears at the bottom of the sheet.
• Next Send Total Cost — the total cost of the expected total water volume
based on the cost of water defined in the System Property Setup dialog box.
• Total Station Runtime — the total expected runtime of all stations in all
schedules which will be included for the next irrigation period.
• Next Run Begins — the time and date of the next runtime.
• Next Run Ends — the time and date the next runtime ends.
• Based on ET — the evapotranspiration (ET) value used to calculate the
projected site data.
Changing the ET Value for Projected Site Data
The evapotranspiration (ET) value in the Based on ET field is used to calculate the
projected site data.
To change the evapotranspiration (ET) value:
1 Enter the value in the Based on ET field or use the scroll buttons on the right
of the field to select the ET value without typing.
2 Click on the Recalculate button.
The projected site data changes based upon the new evapotranspiration (ET)
value you entered.
Viewing and Editing Site Data
7.6