Rain Bird Freedom System for Maxicom2, User Manual, Page: 106 / 208

Setting Rain Bird Weather Station Properties
If you selected Rain Bird Weather Station as the type of weather source, you will
need to complete the Rain Bird Weather Station sheet.
To set Rain Bird weather station properties:
1 With the Weather Source Property Setup dialog box open, select the Rain Bird
Weather Station tab.
The Rain Bird Weather Station sheet comes to the front of the stack.
Rain Bird Weather Station Sheet
2 Set the Rain Bird weather station properties as described in this section.
3 When you are finished setting Rain Bird weather station properties, you can
select another tabbed sheet or click OK to save your changes and close the
dialog box, Apply to save your changes without closing the dialog box, or
Cancel to cancel your changes and close the dialog box.
Selecting the Time Zone
The time zone you select is used to calculate the ET and rainfall log data
regardless of the relative location of the central computer to the weather source.
To select the time zone:
From the drop-down list on the Weather Station Time Zone field, select the
time zone that applies to your weather station.
Setting Weather Source Properties
5.6
The line at the bottom of the
Weather Source Type sheet
tells you if the weather
source type you chose
provides ET data, rainfall
data, or both.