Field Name
Description
Select dialing number format mode
If your XT Codec Unit is not registered with an
H.323 gatekeeper, you can still place a call to an
endpoint registered with a gatekeeper. Check
which format of dialing the gatekeeper accepts and
configure it in this field: <gatekeeper
number><separator> <extension of the called
endpoint>, or <extension> <separator><number>.
The default syntax is
<number><separator><extension>.
Separator
Select the field separator accepted by the
gatekeeper. The default separator is ##.
9. From the web interface only, select
Save
.
Configuring Scopia XT Series Endpoints to use an LDAP Directory
About this task
This procedure describes how to manage the contacts of your endpoint using any of a number of
different types of LDAP servers.
LDAP servers are accessed using the H.350 protocol, which enhances the LDAP standard to include
video endpoint information.
You can define up to 100 LDAP servers either from the endpoint itself or from the web interface. The
LDAP servers visible from the Contacts page are only those labeled as Preferred. Select one of the
preferred LDAP servers from the
Server
field in the contacts page to view its contacts (
84: Viewing and editing contacts in Local LDAP server
on page 135).
Figure 84: Viewing and editing contacts in Local LDAP server
You can define three types of LDAP servers:
• The local built-in LDAP server
You can define only one local LDAP server. When selected, you can edit, create or delete the
details of any contacts stored locally (
Figure 84: Viewing and editing contacts in Local LDAP server
on page 135). The local LDAP server has a password which can be changed if needed.
Installation Guide for Scopia XT5000 Series Version 3.2
Initial Configuration | 135
