From the web interface only, re-enter your new PIN in the
Confirm PIN Code
field.
4. Save your changes as follows:
• From the endpoint, select
Done
.
• From the web interface, select
Save
.
Use this PIN the next time you are accessing advanced settings.
Setting Date and Time
About this task
You can set the date and time from either the endpoint or the web interface.
Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Maintaining the Scopia XT Series Locally from the Endpoint
on page 73.
Procedure
1. Access the date and time settings as follows:
• From the XT Series web interface, select
Administrator Settings > System > Date &
Time > General
.
• From the endpoint's main menu, select
Configure > Advanced > System > Date &
Time > General
.
You need to enter the PIN required to access the
Advanced
settings. The default PIN
is 1234.
2. Set the date and time, as described in
Table 16: Configuring date and time settings
on page
95.
Important:
If you configure set
Internet time
to
Yes
, you cannot modify the date and time fields.
Table 16: Configuring date and time settings
Field Name
Description
Day
Enter the date.
Month
Enter the month.
Year
Enter the year.
Hour
Enter the hour.
Minutes
Enter the minutes.
Internet time
Select
Yes
to synchronize the system clock with the network clock,
thus allowing you to align devices connected to the Internet using
NTP.
Installation Guide for Scopia XT5000 Series Version 3.2
Initial Configuration | 95