Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Maintaining the Scopia XT Series Locally from the Endpoint
on page 73.
Procedure
1. Access the network priority settings as follows:
• From the XT Series web interface, select
Administrator Settings > Networks >
Preferences > General.
• From the endpoint's main menu, select
Configure > Advanced > Networks >
Preferences > General
.
Figure 81: Configuring the Priority setting from the web interface
2. Set the
Priority
setting to the GLAN port that the preferred network uses. This field specifies
in which order the system places outgoing calls.
3. From the web interface only, select
Save
.
4. Access the call settings as follows:
• From the web interface, select
Administrator Settings > Calls > Preferences >
General.
• From the endpoint, select
Configure > Advanced > Calls > Preferences > General
.
Installation Guide for Scopia XT5000 Series Version 3.2
Initial Configuration | 132
