BIOS Configuration
3-27
3
3
EXM Menu
Use the options in this menu to select and configure the available EXM slots. Since
the EPC-9 uses modified EXM backplanes, the first 2 slots are physically covered by
the PMC module(s). Therefore, EXM slots 0 and 1 will not be configurable in Setup
and only slots 2 through 5 are available.
The required configuration information is found in the hardware reference manual
shipped with each EXM expansion module.
Figure 3-12. EXM Menu.
ID
This option is used to select the EXM ID byte value for the EXM card intended to
reside in this slot. If the POST finds that the ID set with this option does not agree
with the ID of the card actually installed in the slot, an EXM configuration error
occurs and the card is not configured. For a slot with no EXM card installed, enter
0FFh, the default value.
P ho e n ix B I OS S et u p - Co p y ri g h t 1 98 5 - 96 P ho e n ix Te c h no l o gi e s L t d.
I t e m S p ec i fi c He l p
E X M S l o t 0
F1 H e lp
↑↓
S e l ec t I t e m - / + C h an g e V a l ue s F 9 S e t up D ef a ul t s
ES C E x it
← →
Se l e ct M en u En t e r S e le c t S ub - M en u F1 0 Pr e v io u s V a lu e s
< T a b> , < S h if t - Ta b > , o r
< E n te r > s e le c t s f i el d .
M a in A dv a n ce d Po w e r
E X M
V M E E x i t
O p t io n B y t e 1 [0 0 ]
I D : [F F ]
E X M S l o t 1
O p t io n B y t e 2 [0 0 ]
I D : [F F ]
O p t io n B y t e 2 [0 0 ]
O p t io n B y t e 1 [0 0 ]
E X M S l o t 2
I D : [F F ]
O p t io n B y t e 2 [0 0 ]
O p t io n B y t e 1 [0 0 ]
E X M S l o t 3
I D : [F F ]
O p t io n B y t e 2 [0 0 ]
O p t io n B y t e 1 [0 0 ]
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com