manualshive.com logo in svg

RadiSys EPC-9, Hardware Reference Manual, Page: 12 / 168

Share
Download
RadiSys EPC-9 Hardware Reference Manual Download Page 12

Product Description

1

1

1-3

  Overview

The EPC-9 is a highly integrated PC-compatible computer designed for use in the
VMEbus and has VXIbus (VMEbus Extensions for Instrumentation) extensions, with
interfaces to the PCIbus and EXMbus. It is a two-slot 6U VMEbus module, with
support for two PCI Mezzanine Cards (PMC). It is compatible with all major PC
software environments, including Microsoft DOS, Microsoft Windows NT, and IBM
OS/2, plus others.

The PC-compatible portion of the architecture includes the following PC-standard
features:

• 

Intel Pentium 100, 133, 166, or 200 MHz processors.

• 

256 KB secondary (L2) cache (512KB optional).

• 

8, 16, 32, 64, 128, or 256MB of  memory, using dual socket SODIMM DRAM.

• 

Standard front panel PC peripheral interfaces include two RS232 serial ports, an
IEEE-1284 bi-directional parallel port, two USB ports, a PCI-based SCSI-2
interface, and 10BASE-T/100BASE-TX Ethernet ports, all with standard
interface connectors. The mouse and keyboard connectors are PS/2 style.

• 

All other standard PC architectural features, including an onboard speaker.

• 

Two RadiSys PMC sites for add-on devices such as SVGA graphics, video
capture, or network interfaces.

•  RadiSys standard EXM expansion interface for adding PC-architecture

peripherals or interfaces.

• 

Phoenix NuBIOS with RadiSys enhancements to support the additional onboard
features and VMEbus environment.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for EPC-9









































































































































































Reviews:

No comments