BIOS Configuration
3-23
3
3
Power Savings
This option enables and selects the kind of power management, or it disables power
management. The options are: “ Disabled” , “ Customize” , “ Maximum” ,
“Medium ”, and “Minimum ”. The default is “Disabled ”.
Standby Timeout
This option enables and sets the inactivity duration required to elapse before the
system is placed into Standby Mode, or it disables the Standby Timeout. The options
are: “ Disabled” , “ 2 min” , “ 15 min” , “ 30 min” , “ 1 hour” , “ 2 hours” , “ 3 hours” ,
and “4 hours ”. The default is “15 min ”.
Suspend Timeout
This option enables and sets the inactivity duration required to elapse before the
system goes into Suspend Mode from Standby Mode, or it disables the Suspend Mode.
The options are the same as for the Standby Timeout, shown above. The default is
“15 min ”.
Standby CPU Speed
Use this option to enable or disable the changing of the CPU speed based upon the
current power management state. The options are: “ Disabled” , “ LOW” ,
“MEDIUM ”, “HIGH ”, and “MAX ”. The default is “MEDIUM ”.
Fixed Disk Timeout
Use this option to enable and set the fixed disk access inactivity period required to tell
the system to shut off the fixed disk drive, or to disable Fixed Disk Timeout. The
options are: “ Disabled” , “ 1 min” , “ 2 min” , “ 3 min” , “ 4 min” , “ 5 min” , “ 10 min” ,
and “16 min ”. The default is “Disabled ”.
CRT
This option enables or disables power management of the CRT during system
entry/exit into/from Standby Mode. The options are “ OFF in Standby” and “ ON” .
The default is “OFF in Standby ”.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com