38
5.9.3 Trim Switch
There are 3 digital trim switches on the transmitter:
DT1
,
DT2
and
DT3
. The preferred functions can be assigned to each trim switch.
The default setting of
DT1
is TRMS,
DT2
is D/R and
DT3
is EXPS.
All the functions for the dial switches as shown in the table of the
Dial Switch section can be assigned to the trim switches.
■
How to Set
In order to assign a function to
DT1
, press the
SET
, move to the
preferred function using the
LEFT
and the
RIGHT
and the press the
SET
to save the selected function.
Move to the right side of screen by pressing the
RIGHT
to set the
change unit per pressing.
The default value of change per click is 2, which means that one
press of the trim switch increases or decreases the relevant value by
2.
Move to the right side of screen by pressing the
RIGHT
to set the
motion direction of trim switch between Normal and Reverse. The
default setting of motion direction is Normal.
How to assign functions, how to set the change unit per pressing
and how to set the motion direction for
DT2
and
DT3
are same as
those for
DT1
.
Summary of Contents for TS401
Page 1: ...User Manual for 4 Channel Transmitter TS401 2 4GHz ...
Page 70: ......
