44
Move to ABS-Mode in the next page by pressing the
DOWN
on
the STM-RIGHT. The default setting of ABS-Mode is INH. In the
INH state, the mixing value cannot be set because the slot for
value setting is blocked by the mark „---„. In order to activate the
ABS-Mode, change INH to ACT first.
Move to the ABS-ABP using the
DOWN
to set the brake return
amount value. The value range is 0 to 100. The default value is 50.
When the value is 0, no brake return is carried out, which means
ABS function does not work. When the value is 50, the brake
return is carried out to the 50% position of trigger point. When
the value is 100, the brake servo performs the brake return to the
neutral position.
Move to the ABS-DLY using the
DOWN
to set the brake delay time
value. The value range is 0 to 100. The default value is 100.
When the value is 0, there is no brake delay. When the value is 50,
ABS brake starts around 0.75 second after the brake is on. When
the value is 100, ABS brake starts around 1.5 seconds after the
brake is on.
Summary of Contents for TS401
Page 1: ...User Manual for 4 Channel Transmitter TS401 2 4GHz ...
Page 70: ......
