56
Move to DTY using the
DOWN
to set the brake pulse duty value.
Duty is the ratio between the brake-on time and brake-off time.
DTY value can one of -3, -2, -1, 0, 1, 2, 3. The smaller value is, the
longer the brake-on time is.
Move to STM using the
DOWN
to set the steer mix value. STM can
be ranged N10~N100, 0, E10~E100. If the value is 0, ABS operates
without regard to steer position. If the value is N30, ABS operates
if steer is positioned in neutral point or inside 30% of steer end
point. If the value is E30, ABS operates if steer is positioned
outside 30% of steer end point. The default value is 0.
5.18.3 TH-Acceleration
This function is used when the maximum throttle is required. If
throttle trigger is moved slightly from its neutral point, the throttle will
be set to the specified value so that the maximum power can be
applied.
■
How to Set
Press
SET
to edit the value when the cursor is placed in Forward.
Modify the value as desired using
LEFT
and
RIGHT
.
Press
DOWN
to move to Brake. when the cursor is placed in
Forward. Modify the value as desired using
LEFT
and
RIGHT
.
Move to Brake using the
DOWN
to set the brake side acceleration
value. Use
LEFT
and
RIGHT
to modify the value. If Brake is
modified to the desired value, press
SET
again to save the value.
Summary of Contents for TS401
Page 1: ...User Manual for 4 Channel Transmitter TS401 2 4GHz ...
Page 70: ......
